ERSE Capacitors

ERSE Audio Grade Capacitors are great for all audio and general electrical applications. From Non-polar Electrolytic to polypropylene caps, ERSE has what you need to make your design not only work, but work at the level of quality you expect. All caps come with low tolerances, low dissipation factors, and excellent all around electrical characteristics. Take a look below at what ERSE offers.

Pulse X - Metallized Polypro

Pulse X metallized polypropylene capacitors are a premium audiophile grade capacitor designed for quick transient response and ultimate musical performance.

C – Cap – Metallized Polypro

C-Cap Capacitors upgrades PULSE to a whole new level. Made of high purity Metallized polypropylene film with unique technology, it achieves an unparalleled sound quality.

PEx - Metallized Polyester

Metallized Polyester Capacitors. ERSE Mylar Caps are a great choice for quality lower frequency applications.

Non-Polar

Non-Polar Electrolytic Capacitors. ERSE' s most economical caps. Great low cost and small sized caps for all crossover needs.

  erseaudio logo Mundorf Jantzen Solen Intertechnik Result
Trade name XQ coils BL140 Perfect Lay Air Coils CU 1.4mm  
Wheeler formula Yes No Yes No No Higher DCR and lower Q factor
Varnish Impregnated Yes Yes Yes No No Varnish impregnated coils offer the lowest possible microfonic distortion
Hysteresis tension devices Yes No No No No Inconsistent winding factor and DCR’s
Precision Orthocyclic tooling matched to .001” Yes No No No No Improved matching of coils. Lower inductive tolerance.
Computerized layer winding Yes No No No No Improved layering and lower DCR.
Purity Guarantee
Click here for details
Yes No No No No Unknown purity and conductivity can result in smeared sound

Tolerance

1% 3% 1% 3% 3% Lower tolerances can assure your coil is closer to the advertised value
1.0mh #14AWG coil DCR CLAIMED 0.208 Ω 0.30 Ω 0.21 Ω NA 0.28 Ω Higher DCRs result in increased power loss and reduced performance.
1.0mh #14AWG coil DCR MEASURED 0.211 Ω 0.306 Ω 0.215 Ω NA 0.293 Ω Higher DCRs result in increased power loss and reduced performance.
  erseaudio logo Mundorf Jantzen Solen Intertechnik Result
Trade name EQ coils L100 Air coils NA CU 1.0mm  
Wheeler formula Yes No No NA No Higher DCR and lower Q factor
Bonded coil Yes Yes
optional
Yes NA No Bonded coils offer lower microphonic distortion
Hysteresis tension devices Yes No No NA No Inconsistent winding factor and DCR’s
Precision Orthocyclic tooling matched to .001” Yes No No NA No Improved matching of coils. Lower inductive tolerance.
Computerized Orthocyclic layer winding Yes No No NA No Improved layering and lower DCR.
Purity Guarantee
Click here for details
Yes No No NA No Unknown purity and conductivity can result in smeared sound

Tolerance

2% 3% 3% NA 3% Lower tolerances can assure your coil is closer to the advertised value
1.0mh #18AWG coil DCR CLAIMED 0.471 Ω 0.49 Ω 0.55 Ω NA 0.60 Ω Higher DCRs result in increased power loss and reduced performance.
1.0mh #18AWG coil DCR MEASURED 0.482 Ω 0.531 Ω 0.572 Ω NA 0.581 Ω Higher DCRs result in increased power loss and reduced performance.