ESQ55-16-2400
2.40mH 16ga

.159Ω – 500w

ESQ – Super Q Coil.

The SUPER Q coil characteristics virtually match any air core coil given a frequency range of 0 Hz to 3000 Hz. Except, the SUPER Q has a much lower DC resistance and much higher quality factor than a comparatively priced air core coil. The SUPER Q coil features a specially ‘H’ shaped, micro thin silicon grain oriented steel. The special ‘H’ shape allows for minimal magnetic flux leaking and increases the coils effective permeability. The high permeable design allowed us to achieve extremely low DC resistance and significantly reduce distortion. The SUPER Q coil is also totally void of any magneto striction distortion. This is due to the plastic encapsulation (insert molded) of the low distortion steel. ERSE designed the plastic molded bobbin with two mounting areas to allow for ease of mounting.

Categories: ,

Description

Specifications

  • Inductance
  • 2.4 mH
  • DCR
  • .16 Ω
  • Wire Gauge
  • 16 AWG
  • Wire Diameter
  • 1.30mm
  • Power Handling
  • 500 w
  • Tolerance
  • 5.0%
  • Lead Length
  • 75 mm
  • RoHS Compliant
  • Yes
  • Weight
  • .99 lb
  erseaudio logo Mundorf Jantzen Solen Intertechnik Result
Trade name XQ coils BL140 Perfect Lay Air Coils CU 1.4mm  
Wheeler formula Yes No Yes No No Higher DCR and lower Q factor
Varnish Impregnated Yes Yes Yes No No Varnish impregnated coils offer the lowest possible microfonic distortion
Hysteresis tension devices Yes No No No No Inconsistent winding factor and DCR’s
Precision Orthocyclic tooling matched to .001” Yes No No No No Improved matching of coils. Lower inductive tolerance.
Computerized layer winding Yes No No No No Improved layering and lower DCR.
Purity Guarantee
Click here for details
Yes No No No No Unknown purity and conductivity can result in smeared sound

Tolerance

1% 3% 1% 3% 3% Lower tolerances can assure your coil is closer to the advertised value
1.0mh #14AWG coil DCR CLAIMED 0.208 Ω 0.30 Ω 0.21 Ω NA 0.28 Ω Higher DCRs result in increased power loss and reduced performance.
1.0mh #14AWG coil DCR MEASURED 0.211 Ω 0.306 Ω 0.215 Ω NA 0.293 Ω Higher DCRs result in increased power loss and reduced performance.
  erseaudio logo Mundorf Jantzen Solen Intertechnik Result
Trade name EQ coils L100 Air coils NA CU 1.0mm  
Wheeler formula Yes No No NA No Higher DCR and lower Q factor
Bonded coil Yes Yes
optional
Yes NA No Bonded coils offer lower microphonic distortion
Hysteresis tension devices Yes No No NA No Inconsistent winding factor and DCR’s
Precision Orthocyclic tooling matched to .001” Yes No No NA No Improved matching of coils. Lower inductive tolerance.
Computerized Orthocyclic layer winding Yes No No NA No Improved layering and lower DCR.
Purity Guarantee
Click here for details
Yes No No NA No Unknown purity and conductivity can result in smeared sound

Tolerance

2% 3% 3% NA 3% Lower tolerances can assure your coil is closer to the advertised value
1.0mh #18AWG coil DCR CLAIMED 0.471 Ω 0.49 Ω 0.55 Ω NA 0.60 Ω Higher DCRs result in increased power loss and reduced performance.
1.0mh #18AWG coil DCR MEASURED 0.482 Ω 0.531 Ω 0.572 Ω NA 0.581 Ω Higher DCRs result in increased power loss and reduced performance.